How to make Bluey balloon sculpture

Tips: Do not put too much air in foil number balloon and Bluey balloon, it is much easier to glue them together if the surface is slightly soft. 
Tear the glue dot sheet into stripes to use.
Watch similar style video, link: https://www.youtube.com/watch?v=vezIiS6K-FM&t=68s
Recommended tools: balloon pump, measuring tape

 

1. Blow up 12PCs 10 - 12inch balloons to similar sizes, tie knots. Suggest around 22cm. (place a ruler or measuring tape or an object next to the balloon when blowing)

2. Tie 2 of them together to make 6 pairs.

Pick the balloon colour you like to put together, blow them up to similar size, tie 2 balloons together to make a pair 

3. Pick 2 pairs, stack them on top of each other like a shape of cross, twist the joint to join them together to make one set, then level them. (Don't worry if they move, as long as they join together)

4. Repeat step 3, make three 12inch balloon sets.

 

 

5. Blow up 8PCs 5inch white balloons (suggest around 10cm), tie 2 of them together to make 4 pairs, repeat step 3, make two 5inch sets.

6. (You will need some space in this step) Open the ribbon, place it on a flat surface, then place first 12inch balloon set on top of the ribbon. 

7. Place a 5inch set on top of the 12inch set (rotate 45 degrees), pull the ribbon around the balloon gaps up and down several times to tie them together. 

 

8. As the picture shows, place 12inch set and 5inch set on top, one after each other, each time rotate 45 degrees and tie, until the base is stable, pull tight and tie a knot. Base is made.

 

9. Blow up the number balloon, if you have a name sticker stick it on. 

Blow up Bluey balloon.

 

10. Turn the base 90 degrees. Place the number balloon on the top, find the best position and stick it onto the base by using multiple glue dots. 

 

11. Find the best position for Bluey balloon to sit on the base as well as touching the number balloon, place multiple glue dots on the joint parts to glue Bluey balloon onto the base and the number balloon. Adjust until the whole display is balanced and stable. 

 

12. Blow up 5inch balloons, glue them onto the base. Glue the paw print cards onto the base to finish.

 

 

TheLittleStuff